ResMed Airfit F30i CPAP full face mask with headgear

Overview ResMed Airfit F30i

The ResMed Airfit F30i Full Face Mask sets new standards for your comfort, offering a durable cushion that covers your mouth and seals under your nose. Designed to provide the ultimate flexibility to sleep in any position without worrying about annoying wrinkles and tangles.

ResMed F30i Mask Features:

Get comfortable again: Sleep in any position
360 degree swivel: freedom of movement as desired
Open line of sight: Wear glasses, read a book or watch TV.
Whisper quiet: Minimal noise
Quickly separate: easy to put on and take off
Fewer red spots: fewer points of contact on the face
Hollow frame design: easier to clean and maintain

Make yourself comfortable again : Sleep in any position
Since there is no bulge on the front of the Resmed F30i masks, you can sleep comfortably in almost any position. Whether you prefer sleeping on your stomach, back, or side, this mask is designed to handle these positions by providing additional pillow support.

360 degree swivel : Freedom of movement to your liking
Your hose connects to the f30i mask at the top of your head, allowing the knob to rotate a full 360 degrees to ensure maximum freedom of movement so your hose doesn't kink and you don't get into annoying tangles advice that can disrupt your sleep and influence your therapy.

Open line of sight: wearing glasses, reading a book or watching TV.
Sit back and enjoy the view with the ResMed Airfit F30i CPAP full face mask.

You can comfortably wear glasses again, watch a game or read a book late into the night. The ResMed F30i's foresight can also help eliminate claustrophobic feelings and reduce your anxiety.

Whisper quiet For ResMed Airfit F30i CPAP full face mask

Makes minimal noise Get comfortable with your partner again thanks to the minimal noise of the Resmed airfit f30i mask.

With the f30i fit pack, Resmed full mask has taken up and improved its self-developed noise-cancelling technology, so that the air fit f30i cpap is so quiet that you may not hear it.

Magnetic clips and quick-change angle: Easy to put on and take off. Remove the connection to your CPAP hose quickly and easily thanks to the attached quick-change angle to the Airfit f30i fit pack.

A simple touch is enough to disconnect the tube from your mask. If you want to remove the entire mask, the magnetic head strap clips make it easy to remove. When you apply a little pressure, the magnets release and you can easily remove the Air Fit f30i masks.

Minimal Touch Points : Reduces red marks The silicone frame is designed to be gentle on your face while providing minimal contact.

You'll also appreciate the next-generation UltraCompact mask pillow, which doesn't cover the bridge of your nose and eliminates the possibility of red spots and pimples forming overnight.

Hollow frame design: Easier to clean and maintain The Resmed F30i mask consists of just a few parts: elbows, hollow frame, headgear and cushion. No additional pipes or parts are required, so you no longer have to worry about cleaning and maintenance.

Product specifications or Resmed Airfit F30i mask:

Mask configuration in AirSense 10, AirCurve, or S9: In the Mask Settings screen of the main panel, select Full Screen.
Therapy pressure range: 4 to 30 cm H20
Sound: When the mask is less than one meter away, the sound is approximately 25 dBA. At a
At a distance of approximately 1 meter, the sound level is 18 dBA, with an uncertainty of 3 dBA.
Operating temperature: 5°C to 40°C
Storage and Transportation Temperature: -4°F to 140°F (-20°C to +60°C)
Storage and transport humidity: Up to 95% relative humidity, non-condensing

FAQ's For CPAP Full Face Mask

Resmed AirFit F30i Full Face Mask Headgear Product Support Guide is here. This is the support section for the Air-Fit F30i Full Face Mask from Res-Med. This section is intended to help you with all your post-purchase needs. To go directly to a section, check below.

Q. What must be included on my prescription?

Answer If your order only contains a resmed airfit f30i full face mask with “Rx required”, your prescription only needs to specify “CPAP supplies” or “CPAP equipment”. If you purchase other “Rx Required” products, other prescription requirements may apply and are listed on the FAQ tab of the product page.

Q. Does the AirFit F30i Cpap share any parts with the AirFit F30?

Answer AirFit N30 and share any product parts.

Q. How do I determine which size to get?

And. Click HERE for the size chart, make sure it is to scale, print it out and follow the instructions to find your perfect fit.

Q. Is the Resmed AirFit F30i mask compatible with the AirMini?

Answer No it is not. In fact, the AirMini is only compatible with these masks:

AirFit P10 FOR AirMini (The AirFit P10 and AirFit P10 for Her that do not come with a setup package are NOT compatible with the AirMini)
Air-Fit N20/ AirFit N20 for you
Air-Fit F20/ AirFit F20 for you
AirTouch F20/ AirTouch F20 for you
Air Fit F30

Q. Does this product come with a headgear?

Answer Yes, this product comes with headwear. However, if your mask frame and cushion are worn out but your headgear still functions properly

Resmed Full Mask Shop For FAQ

What does ResMed do?
ResMed is a medical device company based in San Diego, California. It primarily provides cloud-enabled medical devices to treat sleep apnea (such as CPAP machines, masks, and f30i Fit Pack), chronic obstructive pulmonary disease (COPD), and other respiratory diseases.

Do I have to use a CPAP forever?
As long as you have sleep apnea, you will need to continue using CPAP therapy. That being said, you may stop using your CPAP machine when your sleep apnea is cured or enters remission.

How much do ResMed CPAP machines cost?
Res-Med full mask CPAP machines costs

You'll pay between $700 and $1,000 for CPAP technology, with APAP models slightly lower at around $660.

Can I buy a CPAP machine without a doctor?
You can't buy a CPAP machine without a sleep study and a CPAP prescription, and here's why. CPAP machines are a Class II medical device under FDA regulations, meaning a prescription is required to obtain one.

Instructions for Resmed CPAP Full Face Mask With Headgear

User Guide
Sizing Guide
Airfit F30i fit pack Replacement Guidelines Below

Pillow

The Resmed airfit f30i full face mask headgear cushions cover a large portion of your face and can deteriorate over time with regular wear and tear, putting you at risk from hygiene issues and improper mask use. Therefore, you should replace your Air-Fit F30i full face pillow every month. You can find the replacement cushion here.

Headgear

Over time, the mask's headgear and chin straps may become stretched and lose their elasticity, causing strain and discomfort.

They can also trap bacteria from sweat and moisture. Your headgear should be replaced every six months.

Hoses/Tubes

Your PAP tubes/tubes may develop small holes or cracks that may not even be visible. These can lead to air leaks. If your tubing is leaking, you may not receive your prescribed therapy setting from your CPAP machine.

You should replace your PAP tube every three months. Here you will find the entire selection of hoses/hoses from Apria Direct.

Frame

Your mask frame is in close proximity to your face and therefore needs to be replaced every three months.

Resmed F30i details

Upper head tube connection for freedom of movement
SpringFit frame contours adapt to every face shape
Minimal facial contact for fewer red spots
Get comfortable again: Sleep in any position

Resmed F30i AirFit ™ is a full-face, minimal-contact mask designed to keep breathing tubes out of sight and out of the way, allowing you to comfortably change positions and sleep the way you want.

Size of the pillow	small, medium
Size of the frame	large frame, medium frame

PRODUCT CATEGORIES