ResMed DC Converter 24V 90W For AirSense 10 and AirCurve 10

DC converter 24V 90W

The DC Converter 24V 90W For ResMed's AirStart™ 10, AirSense™ 10 and AirCurve™ 10 machines, connect the AirStart™ 10, AirSense™ 10 and AirCurve™ 10 battery to a 12V or 24V V battery, including the battery used in a boat, car or recreational vehicle. The converter can be used to power the AirSense™ 10 and AirCurve™ 10 machine with built-in HumidAir™ humidifier as well as a ClimateLineAir™ heating tube.

This DC converter works with the following AirStart™ 10, AirSense™ 10 and AirCurve™ 10 machines manufactured by ResMed:

AirStart ™ 10 CPAP with Heated Humidifier HumidAir ™
AirStart ™ 10 Auto CPAP with Heated Humidifier HumidAir ™
AirSense ™ 10 CPAP Machine with Heated HumidAir ™ Humidifier
AirSense ™ 10 Elite CPAP Machine with Heated HumidAir ™ Humidifier
AirSense ™ 10 AutoSet CPAP Device with Heated Humidifier HumidAir ™
AirSense ™ 10 AutoSet for your CPAP machine with Heated HumidAir ™ Humidifier
AirCurve ™ 10 S BiLevel Machine with Heated HumidAir ™ Humidifier
AirCurve ™ 10 VAuto BiLevel Machine with Heated HumidAir ™ Humidifier

This product contains…

The DC Converter 24V 90W includes the following elements

1.DC converter 24V 90W

2.Battery clips

The converter connects directly to your machine with a specific connector for the machine

For use with 12V DC Converter 24V, see ResMed battery manual.

DISCLAIMER: THE CPAP MACHINE DISPLAYED ABOVE IS FOR IDENTIFICATION PURPOSES ONLY. IT IS NOT INCLUDED IN THE 24V CONVERTER CABLE PACKAGE.

This product contains

12V DC Adapter Cable with Alligator Clips
Instructions
Product Specifications
DC Power Converter with Cables Attached 1 lb 13.51 oz

DC Converter with Alligator Clips 2 lb 3.62 oz

Product with packaging 2 lb 8.77 oz

Transducer dimensions (approximately) 6.5 in L x 2.5 in W x 1.5 in H

Total length of DC power cable (male to male, including converter) 110 in

Length of alligator clips and cables with ends 2 ft

Allowable input battery voltage: 12V or 24V

Fuse rated current 20A

additional information from DC Converter 24V 90W

ResMed DC-DC adapter power range converter AirSense10 CPAP. This DC/DC converter 90W allows you to power your ResMed CPAP machine from a cigarette lighter socket (12V or 24V DC source) in a car, boat or other vehicle equipped with a suitable battery. The ResMed Air Sense 10 DC/DC Power Cord 90W is specifically designed for use with a ResMed AirSense 10 or AirCurve 10 device.

It contains the battery terminals to connect it directly to a battery. It is also recommended not to operate the humidifier. This will discharge the power source. You can purchase an additional ResMed side cover for the AirSense 10 that automatically turns off the heat on the heated humidifier.